Optional Ocp Card; Removing The Ocp Shroud - Dell EMC PowerEdge R550 6PX6M Installation And Service Manual

NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 87. Installing the front mounting front PERC module
Next steps
1. Connect the PERC cables to the backplane and system board connectors.
2. Install the cooling fan cage
3. Install the drive backplane
4. Install the air shroud.
5. Follow the procedure listed in

Optional OCP card

Removing the OCP shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
Hold the edges of the OCP shroud and lift the shroud at an angle out of the system.
90 Installing and removing system components
assembly.
cover.
After working inside your
Safety instructions.
Before working inside your
system.
system.