Expansion Cards - Dell EMC PowerEdge R550 6PX6M Installation And Service Manual

Figure 66. Setting the anti-tilt wires to the locked position and tighten the nuts
Next steps
1. Install the air shroud.
2. Follow the procedure listed in the

Expansion cards

NOTE: When an expansion card is not supported or missing, the iDRAC and Lifecycle Controller logs an event. This does
not prevent your system from booting. However, if a F1/F2 pause occurs with an error message, see Troubleshooting
expansion cards section in the Dell EMC PowerEdge Servers Troubleshooting Guide at www.dell.com/poweredgemanuals.
74 Installing and removing system components
After working inside your system.