Front Mounting Front Perc Module; Removing The Front Mounting Front Perc Module - Dell EMC PowerEdge R550 6PX6M Installation And Service Manual

Figure 84. Installing the M.2 SSD
9. Slide the BOSS S2 card carrier into the BOSS S2 module slot.
10. Close the BOSS S2 card carrier release latch to lock the carrier in place.
Figure 85. Installing the BOSS S2 card carrier
Next steps
1. If removed, install the air
2. Follow the procedure listed in the

Front mounting front PERC module

This is a service technician replaceable part only.

Removing the front mounting front PERC module

Prerequisites
1. Follow the safety guidelines listed in the
88 Installing and removing system components
shroud.
After working inside your
Safety instructions.
system.