Table of Contents
Advertisement
Figure 92. Removing the system battery
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing
or removing a battery.
2. To install a new system battery:
a. Hold the battery with the positive side facing up and slide it under the securing tabs.
b. Press the battery into the connector until it snaps into place.
Figure 93. Installing the system battery
Next steps
1. Follow the procedure listed in the
2. Confirm that the battery is operating properly, by performing the following steps:
After working inside your
system.
Installing and removing system components
95
Advertisement
Table of Contents
