Troubleshooting; For Best Performance - Carpet Pro CPU-250 Owner's Manual

Problem
Suction power is
weak.
The vacuum does
not work.
Sudden loss of
power.
Dirt and debris are
blowing through
exhaust vent.
All other service should be performed by an Authorized Carpet Pro Service Center.
• Keep machine and all accessories clean and in good operating condition�
• Replace the bag when it is 2/3 full�
• Replace the filters once a year or as needed�
• Always use genuine Carpet Pro filters and parts, as use of other products may result in poor cleaning or filtration
performance� Carpet Pro filtration products are designed for maximum performance�
• Store machine carefully in a dry area�
• For optimum cleaning performance and safety, follow your owner's manual�

Troubleshooting

Check Point
• Vacuum bag
• Wand or hose
• Filters
• Power cord
• Thermal reset
• Filters

For Best Performance

Possible Solution
• If the vacuum bag is 2/3 full, replace it.
• If clogged or blocked, remove the object.
• Clean or replace filters.
Insert the power plug firmly into an
electrical outlet.
Turn off vacuum and unplug from
electrical outlet. Let vacuum cool down for
at least 30 minutes before turning back on.
Check for clogs. Replace vacuum bag.
Make sure filters are clean, dry and
installed correctly.
10