PROBLEM
Vacuum won't turn on
Vacuum won't pick up
or low suction
Dust escaping from
vacuum
All other service should be performed at a Carpet Pro service center.
• Keep machine and all accessories clean and in good operating condition.
• Change vacuum bags when they are 2/3 full to maintain optimum cleaning efficiency.
• Change filters when dirt is visible on them or every six months if someone in your home suffers from
allergies. Otherwise, once a year should do for replacing the filters.
• Always use genuine bags, filters and parts, as use of other products may result in poor cleaning or
filtration performance. Carpet Pro filtration products are designed for maximum performance.
• Store machine carefully in dry area.
• For optimum cleaning performance and safety, follow your owner's manual.
Troubleshooting
POSSIBLE REASON
• Power cord not firmly
plugged in
• Blown fuse or tripped
breaker
• Needs service
• Vacuum bag full
• Clogged filter
• Hose clogged
• Bag compartment cover
not installed properly
• Filter not installed
correctly
• Vacuum bag not installed
correctly
For Best Performance
12
POSSIBLE SOLUTION
• Plug unit in firmly
• Check house fuse or
breaker. Replace fuse /
reset breaker
• Take to a Carpet Pro
Service Center
• Install new bag
• Install new filter
• Remove obstacle
• Reinsert the cover and
secure latch
• Review filter installation
(page 7)
• Review bag installation
(page 6)