How To Assemble And Operate The Vacuum; How To Adjust The Handle - Carpet Pro CPU-250 Owner's Manual

How to Assemble and Operate the Vacuum

How to Attach the Handle to the Vacuum Cleaner
The vacuum and the handle are packed separately�
1� After first removing the handle screw, slide the handle into the slot on
top of the vacuum cleaner�
2� Line up the small hole on the handle with the small hole on the
vacuum cleaner and insert the screw� Make sure the screw is
tightened securely (Fig� 1)�
3� Turn the upper cord storage hook to the upright position and wind the
power cord around the cord storage hooks when storing the
vacuum cleaner (Fig� 2)�
How to Release the Power Cord
1� The upper cord storage hook has a quick-release action�
To release the cord, rotate the hook downward and the cord will
drop off the handle for immediate use (Fig� 2)�
2� Return the hook to the upright position before attempting to rewind
the cord�
On/Off Pedal
1� To turn the vacuum on, push the power pedal on the right side of the
vacuum nozzle from the user's perspective (Fig� 3)�
2� To turn the vacuum off, push the pedal again�
The handle on this vacuum cleaner can be set to one of three positions – upright,
middle or low�

How to Adjust the Handle

1� To release the handle, step on the handle release pedal on the left side of the
vacuum cleaner nozzle from the user's perspective and pull back the handle
(Fig�1)�
2� Upright position – for storage or when cleaning tools are used (Fig� 2)� Handle locks
in this position�
3� Middle position – for normal cleaning (Fig� 3)�
4� Low position – for cleaning under furniture* (Fig� 4)�
* Once in the middle position, step on the handle release pedal again and lower the
handle to place the vacuum in the low position�
Fig� 2
How to Adjust the Handle
Fig� 2
Fig� 3
5
Fig� 1
Fig� 3
Fig� 1
Fig� 4