How To Adjust The Height Of The Nozzle; Edge Cleaning Feature; Full Bag Indicator; How To Change The Vacuum Bag - Carpet Pro CPU-250 Owner's Manual

How to Adjust the Height of the Nozzle

How to Adjust the Height of the
Nozzle
1� When the vacuum handle is reclined,
rotate the height adjustment dial to the
type of floor being vacuumed (Fig� 1)�
The edge cleaning feature provides improved cleaning near walls and stationary furniture� For maximum edge cleaning,
position the right side of the vacuum from the user's perspective near walls or stationary furniture�
Full Bag Indicator (CPU-250 model only)
The full bag indicator is designed to show when the bag is full or when there is a clog in the
vacuum�
• If the red indicator appears:
• Change the vacuum bag
• If the vacuum bag is not full, but the full bag indicator is red, check the hose for a
clog�
• When cleaning with a tool (dusting brush or crevice tool), the red indicator may appear� In
this case, continue cleaning�

How to Change the Vacuum Bag

Always operate the vacuum cleaner with a vacuum bag installed�
Bags should be changed when they are 2/3 full�
How to Change the Vacuum Bag
1� Unplug the vacuum cleaner� Remove the bag compartment cover
(Fig�1)�
2� Remove the bag from the bag holder by grasping the sides of the
bag collar and pulling straight off� Attach a new vacuum bag by
pushing the collar onto the inlet (Fig� 2)�
3� Pull out the bottom corners of the new vacuum bag to expand the
bag capacity (Fig� 3)�
4� Reinsert the tab on the end of the bag compartment cover into the
groove on the bag compartment housing� Press the bag compartment
cover into place, closing it tightly�

Edge Cleaning Feature

Full Bag Indicator

Fig� 1
Fig� 1
6
Fig� 3
Settings for the
height adjustment dial
Shag/ Plush Medium General
Frieze Carpet Pile Setting
Carpet Carpet
Fig� 1
Fig� 2
Low
Pile
Carpet
& Bare
Floors