Cleaning And Maintenance - Anzzi SH-AZ101BG Installation & Operation Manual

CLEANING & MAINTENANCE
To preserve the finish on the metallic parts of your ANZZI faucet, apply non-abrasive
wax, such as car wax. Any cleaners should be rinsed off immediately.
When there is scale build up on the nozzle of showers, you can turn on the showers
and simply rub over the spray nozzles to remove lime scale.
screw
[06]
a.
a. If the water flow lower than normal, please remove the faucet by loosing the
screws of the Mounting Kit [11] and the Nuts [06].
b. Clean the filters in the connectors and inspect the check valves. Replace the
check valves if necessary.
c. Remove the Thermostatic Cartridge [02] by loosing the screw under the faucet.
Rinse the cartridge with clean flowing water.
d. Install the cartridge and connectors again. Then install the faucet again and secure it.
Caution:
Check all connections for leaks. Retighten if necessary, but do not overtighten.
PG. 8
b.
[02]
c.
connector
filter & check valve
screw