Volume Control (Codec Only) - Polycom Vortex EF2241 Application Note

Next, insert the muting command for Input 1. Click Insert Command, Input, 1, Mute, On:
If you are successful, you should see this in the window:
Repeat this process for Inputs 2-4. When you are done, you should see this:
For Macro 181, repeat the same steps as for Macro 180 except that the Mute for Inputs 1-4 should be off.
When you are finished, you should see this:
If there are more inputs on other Vortex Devices in your system that need to be muted and unmuted, repeat
these steps for the appropriate inputs.
V C (C O )
OLUME ONTROL ODEC NLY
To use the Vortex Device to perform volume control, first set the VSX 8000's Balanced Outputs to F . On
IXED
59