Gree SAP24HP230V1A Service Manual page 64

Hide thumbs Also See for SAP24HP230V1A:
Table of Contents

Advertisement

Service Manual
11
12
13
14
15
16
17
18
19
20
21
2 Buttons
2.1 Layout of Buttons
2.2 Functions of Buttons
No.
1
2
6
3
4
6
7
8
4+2
3+6
2+6
Installation and Maintenance
Lock function
Shield functions (Button operation, temperature setting, On/Off operation,Mode setting are
SHIELD
disabled by the remote monitoring system.)
TURBO
Turbo function state
Memory function (The indoor unit resumes the original setting state after power failure and
MEMORY
then power recovery)
It blinks under on state of the unit without operation of any button
SAVE
Energy-saving function
Ambient/setting temperature value
E-HEATER
Electric auxiliary heating function(this function is yet unavailable for this unit)
BLOW
Blow function
Timing value
QUIET
Quiet function (two types: quiet and auto quiet)(this function is yet unavailable for this unit).
Name
Enter/Cancel Function selection and cancellation.
① Running temperature setting of the indoor unit, range:16~30°C.
② Timer setting, range:0.5-24 hr.
Fan
Setting of the high/middle/low/auto fan speed.
Mode
Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.
Function
Switchover among the functions of Turbo/Save/E-heater/Blow etc.
Timer
Timer setting.
On/Off
Turn on/off the indoor unit.
Press them for 5s under off state of the unit to enter/cancel the Memory function(If memory
is set, indoor unit after power failure and then power recovery will resume the original
▲+Mode
setting state. If not, the indoor unit is defaulted to be off after power recovery. Memory off is
default before delivery.).
By pressing them at the same time under off state of the unit,
Fan+▼
wired controller for the cooling only unit, while
for the cooling and heating unit.
Upon startup of the unit without malfunction or under off state of the unit,press them at the
▲+▼
same time for 5s to enter the lock state, in which case,any other buttons won't respond the
press. Repress them for 5s to quit this state.
Function
will be displayed on the
will be displayed on the wired controller
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sap18hp230v1a

Table of Contents