Gree SAP24HP230V1A Service Manual page 44

Service Manual
Tap "Name" to customize the preset name.
Preset device can't be selected and it will default to "babyroom". Select "On" for the timer type. Select repeating days to complete the
preset.
Multi-device preset: �������������������������������������
Please refer to the instructions as how to set preset time, name, timer type and repeating days for a single device.
Tap "Preset device" to select one or more devices. Then return to the page "Device".
(4) Link(This function is applicable to some models)
���������������������������������������������������������������
commands to realize devices linkage.
Step 1: Set the parameters of master device (Select master device, select environment parameters, select master device status).
Tap at the top right corner of the homepage "Device". Select "Link" and enter the page "Add linkage". Tap "Device/Param" to enter
the page "Select device". Take "baby room" as an example. Tap "babyroom".
Enter the page "Select environment parameters".
Technical Information
41