Timer; Falling Asleep To Music; Sleep Timer; Waking Up To Music - Sony DHC-NXM4D Operating Instructions Manual

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90min t 80min t 70min
t ... t 10min t OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Other operations
To
Check the
remaining time*
Change the time
to turn off
Cancel the Sleep
Timer Function
* You cannot check the remaining time if you select
"AUTO".
Note
Do not set to "AUTO" during Synchro Recording on a
tape.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
48 GB
Press
SLEEP once.
SLEEP repeatedly to select the
time you want.
SLEEP repeatedly until "OFF"
appears.

Waking up to music

— Play Timer

You can wake up to music at a preset time. Make
sure you have set the clock (see "Setting the
clock" on page 12).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• DVD: Load a disc. To start from a
specific track, make a program (see
"Creating your own program" on
page 20).
• Tape: Load a tape.
• Tuner: Tune in the preset radio station
(see "Listening to the radio" on page 39).
2
Press VOLUME + or – to adjust the
volume.
3
Press CLOCK/TIMER SET.
4
Press M or m repeatedly to select
"PLAY SET?", then press ENTER.
"ON" appears and the hour indication
flashes.
5
Set the time to start playing.
Press M or m repeatedly to set the hour, then
press ,.
The minute indication flashes.
Press M or m repeatedly to set the minute,
then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
Press M or m repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
t TUNER y DVD PLAY T
t TAPE PLAY T
8
Press ENTER.
The type of timer ("PLAY TIMER"), the
start time, the stop time, and the sound
source appear in turn, before the original
display returns.