Sony DHC-NXM4D Operating Instructions Manual page 14

8
Press < or , repeatedly to select a
TV type connecting to the system, then
press ENTER.
"QUICK SETUP" is complete.
For DHC-NXM2D
1
Turn on your TV and select the video
input.
2
Press ?/1 to turn on the system.
3
Press FUNCTION + or – repeatedly (or
DVD on the unit) to switch the function
to DVD.
The guide message appears on the TV
screen.
Note
When a disc is in the system or the disc tray
opens, the guide message does not appear on the
TV screen.
4
Press ENTER.
"LANGUAGE SETUP" appears.
LANGUAGE SETUP
The language you select in "LANGUAGE
SETUP" is for "OSD", "DVD MENU" and
"SUBTITLE" (page 27).
When "OTHERSt" appears, you can
select "OTHERSt" to select the language
from the language code list using the
number buttons (page 70). The selected
language code (4-digit) is displayed the
next time you select "OTHERSt". You
can select the language for the DVD menu
("DVD MENU") and the language of the
subtitle ("SUBTITLE").
5
Press M or m repeatedly to select a
language, then press ENTER.
The setting is selected.
"TV TYPE" appears.
14 GB
ENGLISH
CHINESE1
CHINESE2
OTHERS
6
Press < or , repeatedly to select a
TV type connecting to the system, then
press ENTER.
"QUICK SETUP" is complete.
If you make a mistake
Press O RETURN, then select the item again.
To quit QUICK SETUP
Press DVD SETUP.
To change settings of QUICK
SETUP
1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press M or m repeatedly to select "SET UP",
then press ENTER.
3
Press M or m repeatedly to select "QUICK",
then press ENTER.
"LANGUAGE SETUP" appears.
4
Change each setting following the same
procedures from step 5.
Notes
• Only when you turn on the system for the first time,
or after performing "RESET" (page 63), the guide
message appears.
• When you select "4:3" in "TV TYPE", "4:3
LETTER BOX" is selected (page 29).
• For DHC-NXM4D, depending on selected position
in "LISTENING POSITION" or "ROOM SIZE", the
distance and level of each speaker will be set
automatically.
• When a disc is in the system, the guide message does
not appear on the TV screen. To perform QUICK
SETUP, press DVD Z to remove the disc, press ?/1
to turn the system off, then press ?/1 again to turn
the system on.
• If you want to change each setting, see "DVD –
Various functions" on page 25.
• For DHC-NXM4D, the illustrations displayed for
"ROOM SIZE" and "LISTENING POSITION" are
only examples and may differ from the actual room
size and layout. The settings for "SPEAKER
SETUP" (page 35) do not appear on these displays.