Table of Contents
Advertisement
TROUBLESHOOTING
Problem
The fan(s) do(es) not get
started.
Low air flow.
Noise, vibration.
STORAGE AND TRANSPORTATION REGULATIONS
•
Store the unit in the manufacturer's original packaging box in a dry closed ventilated premise with temperature range
from +5 °C to + 40 °C and relative humidity up to 70 %.
•
Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion, insulation, and sealing
deformation.
•
Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.
•
Follow the handling requirements applicable for the particular type of cargo.
•
The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation and
mechanical damage. The unit must be transported only in the working position.
•
Avoid sharp blows, scratches, or rough handling during loading and unloading.
•
Prior to the initial power-up after transportation at low temperatures, allow the unit to warm up at operating temperature for at least
3-4 hours.
12
Possible reasons
No power supply.
Filters, fans or the heat exchanger
are soiled.
The ventilation system is soiled or
damaged.
The fan impeller is soiled.
The fan or casing screw connection
is loose.
Troubleshooting
Make sure the power supply line is connected correctly,
otherwise troubleshoot a connection error.
Clean or replace the filters. Clean the fans and the heat
exchanger.
Clean the ventilation system components.
Replace the damaged components.
Clean the impellers.
Tighten the screw connection of the fan or the casing
against stop.
VUE P3
www.ventilation-system.com
Advertisement
Table of Contents
