Timer (optional)
Using the timer, the heating and the oil sep-
arator of the appliance can be controlled in
a fully automatic manner.
A Daily overview of the programmed
switching times (5 = Friday)
B Channel status
C1 = Oil separator - Channel 1
C2 = Heating - Channel 1
C Operating voltage OK
Gear reserve operations
D Menu
E Display special functions
F Display summer/ winter time
G Current weekdays (1=Monday,
2=Tuesday...)
H Confirm
Yes
I
Continue...
No
Recommendation:
Run the oil separator for a few minutes
–
before heating.
Take into account the heating time of
–
approx.1 hour of the heating element
while programming the timer.
Note
The operating instructions of the timer are
located in the switching cabinet.
Set the timer according to the operating
instructions of the manufacturer.
Set the heating switch and the oil sepa-
rator switch to automatic mode at the
operating panel. Timer is activated.
Shutting down
Switch off the main switch and close.
Close cover.
Frost protection
Empty the detergent container.
Empty the pump.
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Drain off the detergent liquid.
Switch off the appliance and remove
the plug from the socket.
Release parking brakes.
Push the appliance.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
5
-
EN
15