Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Axis Manuals
  4. Thermal cameras
  5. Q2101-TE
  6. Repainting instructions

Axis Q2101-TE Repainting Instructions

Hide thumbs Also See for Q2101-TE:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
AXIS Q2101-TE Thermal Camera
Repainting instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the Q2101-TE and is the answer not in the manual?

Questions and answers

Related Manuals for Axis Q2101-TE

Summary of Contents for Axis Q2101-TE

  • Page 1 AXIS Q2101-TE Thermal Camera Repainting instructions...
  • Page 2 Risks with repainting There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage - Always handle the product in an ESD safe environment.
  • Page 3 AXIS Q2101-TE Thermal Camera Repaint the product Repaint the product Preparations • If applicable, disassemble the device according to the instructions in this document. • Clean all parts that will be repainted thoroughly to remove grease, dust, or oil. •...
  • Page 4 AXIS Q2101-TE Thermal Camera Repaint the product Disassembly Disassemble the housing Screws (4x, T20) Bottom chassis Top cover 1. Remove the bottom chassis from the top cover.
  • Page 5 AXIS Q2101-TE Thermal Camera Repaint the product Screws (2x, T20) Weathershield 2. Remove the weathershield from the top cover.
  • Page 6 AXIS Q2101-TE Thermal Camera Repaint the product Masking Masking the top cover Vent membrane Label Inside Screw holes (4x) Front window Mask the following parts of the top cover: 1. The vent membrane. 2. The label. 3. Everything on the inside including the sealing surface to the bottom chassis.
  • Page 7 AXIS Q2101-TE Thermal Camera Repaint the product Masking the bottom chassis Label Wall mount surface Top side Mask the following parts of the bottom chassis: 1. The product label. 2. The surface under the adapter for the wall mount. 3. Everything on the top side of the bottom chassis, including the gasket and the four screw holes.
  • Page 8 3. To get a better coverage and clearer color, apply a second layer of spray paint. 4. When the paint is dry, remove the masking and reassemble the product. Reassembly Reassemble the product according to the instructions in the installation guide available at axis.com.
  • Page 9 Repainting instructions Ver. M1.3 AXIS Q2101-TE Thermal Camera Date: February 2023 © Axis Communications AB, 2023 Part no. T10185528...