Setting Up The Device - Fujitsu ESPRIMO P372 Series Operating Manual

Getting started

Setting up the device

Device Ergonomic Workstation
When setting up your device, please read the recommendations and
safety notes in the "Safety" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, troublesome vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Do not stack several devices on top of each other.
Do not expose the device to extreme ambient conditions (see
specification", Page
device against dust, humidity and heat.
Operating position
Use the device only in the vertical operating position.
12
45, section "Ambient conditions"). Protect the
"Technical
Fujitsu Technology Solutions