Colorful C.H110M-K D3 PLUS V20 User Manual page 11

3.BIOS setup
Entering BIOS Setup
Power on the computer and the system will start the Power On Self Test (POST)process. When the message below
appears on the screen, press <DEL> key to enter BIOS:
Press F1 to Run Setup
Press F2 to Load default values and continue
Boot Option Priorities（how to install operating system）
Boot device Priority Setting.If user will install operating system, please put"Boot Option #1"set to your CD-ROM or your
USB device, After setting, press "F10" key to save and exit,, System boot from CD-ROM or U disk.
Main Advanced
Boot Configuration
Operating system select
Launch Storage OpROM
Bootup Numlock State
Quiet Boot
Update System BIOS
Boot mode select
Set Boot Priority
Boot Option #1
Hard Disk Drive Priorities
4.Copyright Notice
Copyright
This motherboard manual belongs to Colorful Technology and Development CO, LTD. No one is permitted to copy,
change, or translate without our written permission.
Chipset C.Oclock
Windows 8.X/10
Enabled
On
Enabled
Disabled
LEGACY
Exit
→←Select Screen
↑↓/Click:Select Item
Enter/ Dbl Click: Select
+/-: Change Opt
F1: General Help
F7: Previous Values
F8: Screen Shot
F9: Optimized Defaults
F10: Save & Exit
ESC/Right Click: Exit