Table of Contents
Advertisement
3. Installing and Using Software
There's one more step before you can begin to use your PlexWriter drive: you need
to install special software on your computer. There are three software types:
SCSI support: Software that allows your SCSI board to operate with your
computer and the PlexWriter drive. Even if your SCSI board is already installed
and operational, you may need to update this software.
Device driver: Software program that allows your computer to interact with the
PlexWriter drive. Drivers are included in Windows 95/98 and NT that let you
operate your PlexWriter as a CD-ROM device (reader). If you are using
Windows 3.x or MS-DOS, you may have to install drivers yourself.
Application software: Software programs for specific tasks, such as pre-
mastering CDs, backing up your hard disk or files, capturing audio, duplicating
CDs, and more. Some of these applications are supplied with your PlexWriter,
while others are available from other vendors.
Quick Installation in Windows 95/98
Use this section for a quick installation of your PlexWriter drive in a Windows 95 or
Windows 98 system. If you encounter any problems, refer to "Appendix B: Installing
in Windows."
Windows 95/98 should automatically recognize and support your SCSI interface
board and PlexWriter drive. Microsoft has included a generic CD-ROM device
driver in the operating system. This driver also supports the PlexWriter as a reader.
Microsoft has also included numerous controller-specific drivers on the Windows
95/98 CD-ROM.
Previously installed SCSI interface board: If you connect your PlexWriter
drive to a previously installed and operating SCSI interface board, Windows
95/98 will recognize it automatically. You will need to install third party software
to use the PlexWriter as a recorder.
PlexWriter Drive with PCI SCSI Kit: If you purchased your SCSI interface
board in a Plextor kit, use the Plextor-provided CD-R software CD to access the
necessary drivers.
New SCSI controller board: If you purchased your new SCSI interface board
from another source, consult the documentation provided by the manufacturer of
the SCSI interface board for installation instructions.
You will soon be using the highest performance CD-RW drive around. If you have
any problems at all, our technical support staff will help you.
PlexWriter 8/2/20 Operation Manual
33
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
