Cleaning Discs; Using The Writing Speed Indicators - Plextor PX-W4012TSe Installation And User Manual

Cleaning Discs

For proper read and write performance, your CD-R, CD-RW, and CD-ROM discs
must be clean. Trying to record on a dirty disc may result in a failed session and ruin
the disc.
To clean the disc, wipe the disc using a clean, soft cotton cloth to remove surface dirt
such as fingerprints. Use a straight-line motion, wiping from the center out. Do not
wipe the disc in a circular motion.
Figure 21: Wipe the Disc from the Center Outward
HINT: Keep your frequently used discs in jewel cases at all times to prevent them
from becoming dirty or damaged.

Using the Writing Speed Indicators

When you are writing to a CD or CD-RW disc, the color and blink rate of the front-
panel WRITE L and WRITE H indicators show the speed of writing, as follows:
Writing Speed WRITE L Indicator
CD-R at 40X, 32X OFF
CD-R at 1X-24X Amber ON
CD-RW at 12X OFF
CD-R at 10X, 4X Amber ON
If the ON/READ indicator is on green during a write operation, and WRITE L and
WRITE H are off, BURN-Proof is active.
Section 3. Using Your PlexWriter
WRITE H Indicator
Amber ON:
S
40-ms blink interval: 40X CD-R
S
80-ms blink interval: 32X CD-R
OFF
Amber ON:
S
80-ms blink interval
OFF
PlexWriter 40/12/40S Installation and Users Manual
31