Handling Cd Media; Cleaning Discs - Plextor PX-W1210TA Operation Manual

Section 4. Using Your PlexWriter

Handling CD Media

Take care when handling blank CD-R and CD-RW media. Dust, scratches, and
fingerprints on the data side of the disc can cause write errors during recording.
When picking up or holding blank media you can either place your fingers along the
outer edge of the disc, or place one finger through the center hole and one finger on
the outer edge. Once you have finished creating a disc, label it by writing on the top
using permanent ink.
NOTE: We do not recommend placing self-sticking CD-R labels on the disc. The
weight of the label may unbalance the disc and cause write errors during recording or
read errors during reading.

Cleaning Discs

For proper read and write performance, your CD-R, CD-RW, and CD-ROM discs
must be clean. Trying to record on a dirty disc may result in a failed session and ruin
the disc.
To clean the disc, wipe the disc using a clean, soft cotton cloth to remove surface dirt
such as fingerprints. Use a straight-line motion, wiping from the center out. Do not
wipe the disc in a circular motion.
Figure 14: Wipe the Disc from the Center Outward
HINT: Keep your frequently used discs in jewel cases at all times to prevent them
from becoming dirty or damaged.
26
PlexWriter 12/10/32A Operation Manual