Digital Watchdog Blackjack Tower DW-BJT71xxT/LX Quick Start Manual page 7

Linux®
1. Open Settings > Network
2. Click Setting of the Ethernet that is Connected
3. Change to Manual then enter Address, Netmask , Gateway.
* Do not enter Gateway information if there is no Gateway in this network.
4. Click Apply to save
5. Restart the connection by switching OFF then turn ON.
6. Click Settings of the Ethernet not connected.
7. Change to Manual then enter Address, Netmask, Gateway then DNS.
8. Click Apply to save
9. Connect the network cable and verify the connection.
NOTE
If you are not connecting to the Blackjack
port forwarding on your router to access the server. Contact your Network Administrator or Installer for
additional information
from the same network, you may be required to perform
®
Quick Start Guide
7