Local Network - Digital Watchdog Blackjack Tower DW-BJT71xxT/LX Quick Start Manual

6. Click OK to close then click close to go back to network connections.

Local Network

7. Right-click on the other Ethernet, the one with network cable unplugged, and click "Properties".
6. Click OK to close then click Close to go back to Network Connections.
6. Click OK to close then click Close to go back to Network Connections.
Local Network
Local Network
8. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.
7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.
8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
9. Select "Use the following IP address" (Use the following DNS server addresses will be selected automatically).
10. Enter IP address and Subnet mask of the camera network.
10. Enter IP address and Subnet mask of the camera network.
10. Enter IP address and subnet mask of the camera network.
* Consult with your IT department if you do not know what IP address to use.
* Consult with your IT department if you do not know what IP address to use.
11. Click OK to close then click close to go back to network connections.
11. Click OK to close then click Close to go back to Network Connections.
12. Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
12. Connect a network cable to the Ethernet port B10 on the diagram (page 2) to the switch on the local network.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
13. Close the network connections dialog.
11. Click OK to close then click Close to go back to Network Connections.
12. Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
Linux
6
1. Double-click the Network icon
Linux
1. Double-click the Network icon
on the Desktop
on the Desktop