Adjustment Procedures
The modules configuration and gain/EQ settings
are set using combinations of the Dip Switch and
the two push buttons located on the module edge.
BUTTONS
UP
Setting functionality and calibration is interactive
and not an implicit switch setting process. The
adjustments are made through imbedded micro-
controller and settings stored on internal flash ram.
To simplify the configuration and setting of the
module a series of procedures has been defined to
make setting the module easier. These are:
•
•
•
•
•
These procedures capture most things you would
need to change or set on the module.
Reference Manual D VA 3120 L Version1.2
DIP SWITCH
DN
1
Set Dual 1:3 or 1:6 Mode
Set Video Gain
Set Equalization
Set Unity Gain
Set Unity Equalization
OFF
ON
2
3
4
Page 17