Related Manuals for Lynx D VD 3020
Summary of Contents for Lynx D VD 3020
-
Page 1: Reference Manual
Reference Manual D VD 3020 Dual SDI Distribution Amplifier © LYNX Technik AG Brunnenweg 3 64331 Weiterstadt Germany www.lynx-technik.com... - Page 2 Except as expressly written by LYNX Technik AG, the furnishing of this document does not give you any license to patents, trademarks, copyrights or other intellectual property of LYNX Technik AG or any of its affiliates.
-
Page 3: Warranty
LYNX Technik, with shipping charges prepaid. LYNX Technik shall pay for the return of the product to the customer if the shipment is within the country which the LYNX Technik service center is located. -
Page 4: Regulatory Information
Reference Manual D VD 3020 Version1.2 Regulatory information Europe Declaration of Conformity LYNX Technik AG Sandstrasse 7 D-64404 Bickenbach Germany Declare under our sole responsibility that the product TYPE: D VD 3020 To which this declaration relates is in conformity with the following... -
Page 5: Table Of Contents
Reference Manual D VD 3020 Version1.2 Contents Warranty ......................3 Regulatory information ..................4 Europe........................4 Declaration of Conformity ................4 USA ........................4 FCC 47 Part 15.....................4 Contents ......................5 Getting Started....................7 Packaging......................7 Product Description ..................7 Functional Diagram ..................8 Module Layout ....................8 Connections ...................... - Page 6 Reference Manual D VD 3020 Version1.2 This Page is intentionally left blank Page 6...
-
Page 7: Getting Started
360Mbit/s, 540Mbit/s) and will transparently pass data from 10Mbits/s to 640Mbits/s in non-reclocked mode. The D VD 3020 is part of the 3000 series of MiniModules, which offer high quality, modularity and flexibility in a very small form factor ideal for applications where space is at a premium. -
Page 8: Functional Diagram
1 to 4 Figure 1- D VD 3020 Functional Diagram Module Layout Figure 2 shows the physical layout of the D VD 3020 MiniModule. Video I/O is made through standard BNC video connectors. Module configuration is set via a small dip-switch located behind a small access hole in the bottom of the module. -
Page 9: Front Side
Reference Manual D VD 3020 Version1.2 Alarm / Status LED D VD 3020 SDI IN 2 SDI IN 1 OUT 2.1 OUT 1.1 OUT 2.2 OUT 1.2 OUT 2.3 OUT 1.3 Made In Germany www.lynx-technik.com OUT 2.4 OUT 1.4 Front... -
Page 10: Connections
Reference Manual D VD 3020 Version1.2 Connections Video Connections The D VD3020 MiniModule is configured with standard 75 Ohm BNC connectors. Connection is self-explanatory. We recommend the use of high quality video cable for digital video connections to reduce the risk of interference or errors due to excessive cable attenuation. -
Page 11: Power Connections
Data Connection Power Connection i2C-SDA (data) + 5V i2C-SCL (clock) Male Connector (view looking into connector from front) Caution Only use the optional LYNX R PS power modules. Ensure the 5-pin power connector is locked securely in place. Page 11... -
Page 12: Installation
Installation Mechanical Stand Alone Operation The D VD 3020 MiniModule can be used in a stand alone application. There are two options for the use of the module in this way. a) Using the R FR 3005 Rack Frame 1 option. This... -
Page 13: Multiple Units
Reference Manual D VD 3020 Version1.2 Multiple Units Most applications will require more than one MiniModule, which can include any of the available Series 3000 MiniModule product range. There are two options for mounting multiple units. a) Using the R FR 3005 Rack Frame option. This... -
Page 14: Electrical Installation
/ receiving the signals from the module or damage can result. Caution. Only use the optional Lynx R PS 1 power modules. Ensure the 5-pin power connector is locked securely in place. -
Page 15: Multiple Units
Once set, all settings are automatically saved in non-volatile internal memory. The module will always recall the settings used to prior to power off. The D VD 3020 is configured locally via the integral 4-position dip-switch. DIP SWITCH Status LEDs... -
Page 16: Switch Settings
Reference Manual D VD 3020 Version1.2 Switch Settings Below the switch settings for the 4-position dip- switch are defined. Switch Setting Function Enable Local Adjustment Disable Local Adjustment Dual 1:4 mode Single 1:8 mode * Outputs 1 to 4 Reclocked... -
Page 17: Switch Function Detail
This switch configures outputs 5 to 8 to be reclocked or non reclocked. ON sets reclocked OFF sets non-reclocked Factory Preset Condition The D VD 3020 is delivered preset for the following mode of operation: Mode 2 x 1:4 Outputs 1-4... -
Page 18: Alarm/Led Status Indicators
Reference Manual D VD 3020 Version1.2 Alarm/LED Status Indicators The D VD 3020 module has built in LED indicators, which serve as alarm and status indication for the module. Function is described below. The Indicators are found on the bottom of the module and can be seen through the access hole provided. -
Page 19: Locate Function
Reference Manual D VD 3020 Version1.2 Locate Function For large systems which have many modules in various locations we have added a utility which will help visually identify a module quickly. (When used in conjunction with the optional control system and... -
Page 20: Specifications (D Vd3020)
IEC 60950/ EN 60950/VDE 0805 Mechanical Size 85.5mm x 35.3mm x 27mm + connectors Weight 150g Ambient Temperature 5°C to 35°C Maintaining specifications Humidity Max 80% non condensing Supplied Accessories Documentation D VD 3020 Reference Manual and Quick Ref guide Page 20... -
Page 21: Available Options
Reference Manual D VD 3020 Version1.2 Available Options Below is a list of available options for the D VD 3020 MiniModule. Please refer to product brochures or our web site for more detailed information. Model Description External brick power supply module for R PS 3001 E Series 3000 MiniModules. -
Page 22: Parts List
Reference Manual D VD 3020 Version1.2 Parts List Due to the very dense design and high level of integration there are no user serviceable electronic assemblies within the D VD 3020 module. D VD 3020 Mini Module (complete) Description Dist Amp Dig Video... -
Page 23: Contact Information
Reference Manual D VD 3020 Version1.2 Contact Information Please contact your local distributor; this is your local and fastest method for obtaining support and sales information. LYNX Technik can be contacted directly using the information below. Address LYNX Technik AG Brunnenweg 3 64331 Weiterstadt Germany. - Page 24 Reference Manual D VD 3020 Version1.2 This Page is intentionally left blank Page 24...
- Page 25 Reference Manual D VD 3020 Version1.2 Notes Page 25...