Operation
Port Switching
All port switches begin with tapping the Scroll Lock key twice. The tables
below describe the actions that each combination performs.
Note: If using the Scroll Lock key conflicts with other programs running on the
computer, the Ctrl key can be used instead.
Port Cycling
Hotkey
[Scroll Lock]
[Scroll Lock]
[Enter]
Port Access
Hotkey
[Scroll Lock]
[Scroll Lock] [n]
[Enter]
Note: [n] represents the computer's Port ID number (1, 2, 3 or 4). Replace [n]
with the appropriate Port ID when entering hotkey combinations.
Hotkey Setting Mode
To invoke Hotkey Mode:
1. Press and hold [Num Lock].
2. Press and release [-].
3. Release [Num Lock].
Action
Brings the KVM focus from the port that currently
has the KVM focus to the next port on the
installation.
1 to 2; 2 to 3; 3 to 4; 4 to 1.
Action
Brings the KVM, USB, and audio focus to the
computer attached to the port corresponding to the
specified Port ID.
6