Service Schedule - Kärcher PROCHEM Peak GTX2 Operating Instructions Manual

Maintenance

Service Schedule

Vacuum Pump
Solution Pump
Chemical Inlet Tube Strainer
Vacuum Inlet Filter (In Waste Tank)
Vacuum Hoses
Automatic Waste Pump
Vacuum Pump
Water Box Float Valve
Solution Pump Inlet Strainer
Temperature Balance Orifice
Solution Outlet Screen
Pressure Regulator
Pressure Regulator
Solution Pressure Hoses
Float Valve Seal
Chemical Valves
38
Engine Daily
Engine Daily
Daily
Daily
Daily
Daily
Daily
Daily
Weekly*
Weekly
Weekly*
Weekly
Battery Weekly*
Weekly*
50 hrs
50 hrs
100 hrs
Engine 100 hrs
Engine 100 hrs
Engine 100 hrs
Battery 100 hrs*
200 hrs.
Engine 200 hrs
Engine 200 hrs
Fuel Pump 200 hrs
Engine 200 hrs
200 hrs
86411120 Manual Operators - Peak GTX2 Prochem
Check engine oil level. *** Fill to proper level
Check coolant level in overflow bottle
Spray water displacing lubricant in lubrication cup at front of
console for 5 sec.
Check oil level.** Fill to proper level
Check strainer for blockage, remove any debris
Clean filter, inspect, replace if damaged
Wash out with clean water
Inspect and remove any debris or sediment
Check oil level. Fill to proper level
Check for proper seating and shut-off
Check for debris and clean
Remove, clean and check screen (as needed).
Check for proper fluid level. Fill with distilled water only
Inspect and remove any debris or blockage
Lubricate o-rings
Lubricate plug behind spring
Inspect for damage or impending damage
Change engine oil***
Change oil filter***
Check fan belt tightness
Clean battery terminals
Replace seal
Service air cleaner elements*
Check radiator hoses and clamp tightness
Check hose connections
Check spark plugs for carbon deposits and proper gap
Inspect and/or adjust packing nuts