Table of Contents
Advertisement
This manual contains the following sections:
•
How to Use This Manual
•
Safety
•
Installation
•
Operations
•
Maintenance & Service
The HOW TO USE THIS MANUAL section will tell you
how to find important information for ordering correct
repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA box
is located on the inside of the front cover of this manual.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
The model and serial number of your machine is
located approximately where shown.
86411120 Manual Operators - Peak GTX2 Prochem
How to Use This Manual
The SAFETY section contains important information
regarding hazardous or unsafe practices for this
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The INSTALLATION section contains information on
how to properly install the unit in your vehicle.
The OPERATIONS section is to familiarize the operator
with the operation and function of the machine.
The MAINTENANCE section contains preventive main-
tenance to keep the machine and its components in
good working condition. They are listed in this general
order:
•
Engine
•
Vacuum Pump
•
Solution Pump
•
Drive Belts, Pulleys & Hubs
•
Chemical Pump
•
Hoses
•
Vac / Exhaust Heat Exchanger
•
General Service Adjustments
•
Machine Troubleshooting
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement parts
numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower right corner of the front cover.
5
Advertisement
Chapters
Table of Contents
