Intel ® Integrated Raid Module Rms2Mh080 Characteristics; Figure 4. Card Layout; Table 1. Jumper Description - Intel RMS2MH080 Hardware User's Manual

3
Intel
RMS2MH080 Characteristics
s
Jumper Description
J1 - J2 Internal mini SAS Port
Connectors, Ports 0-3 and 4-7
J3 Board-to-board connector for
Battery Backup Unit
2
J4 Keyed I C Connector
J5 RAID Premium Feature Key
Header
J6 UART debug header
J7 Bootstrap CONFIG header
Intel® Integrated RAID Module RMS2MH080 Hardware User's Guide
®
Integrated RAID Module

Figure 4. Card Layout

Table 1. Jumper Description

Type
20-pin connector
3-pin keyed
connector
2-pin connector
4-pin connector
4-pin connector
Comments
Connection to SAS/SATA devices:
•
J1 = SAS_A (Port 0-3)
•
J2 = SAS_B (Port 4-7)
Provides an interface to the daughter card that
contains the battery backup unit.
Out-of-band enclosure management (SES2).
Enables support for RAID Premium Feature.
Factory use only (may be removed in future)
Factory use only (may be removed in future)
11