Chapter 3: Intel ® Integrated Raid Module Srombsasmr Characteristics; Figure 4. Card Layout; Table 1. Jumper Description - Intel SROMBSASMR Hardware User's Manual

3
Intel
SROMBSASMR Characteristics
J7 J6
s
Jumper Description
J1 - J4 Internal SAS/SATA Port
Connectors, Ports 0-3
J5 Board-to-board connector for
Battery Backup Unit
J6 Universal Asynchronous
Receiver/Transmitter (UART)
2
J7 Keyed I C Connector
J8 Debug Connector
Intel® Integrated RAID Module SROMBSASMR Hardware User's Guide
®
Integrated RAID Module
J1- J4

Figure 4. Card Layout

Table 1. Jumper Description

Type
20-pin connector
4-pin connector
3-pin keyed
connector
4-pin connector
J5
J8
Comments
Connection to SAS/SATA devices:
•
J1 = SAS/SATA Port 0
•
J2 = SAS/SATA Port 1
•
J3 = SAS/SATA Port 2
•
J4 = SAS/SATA Port 3
Provides an interface to the daughter card that
contains the battery backup unit.
Not populated and should not be used.
Out-of-band enclosure management (SES2)
Reserved
AF003065
13