Navigation; Operating Modes; Measuring Mode (Measured Value Display); Setting Mode - Xylem SI Analytics Lab 955 Operating Manual

Operation
16
4.4

Navigation

4.4.1

Operating modes

The meter has the following operating modes:
Operating mode
Measuring
Calibration
Setting
4.4.2

Measuring mode (measured value display)

The following functions are available in the measuring mode (measured value
display):
• To change the indication on the measuring screen (e.g.
<-> Resistance), press <MODE>.
• To open the measurement settings, press <MODE_> (long pressure).
• To open the system settings, press <ENTER__> (long pressure).
4.4.3

Setting mode

The following functions are available in the setting mode:
• To change the current setting, press <><>.
• Confirm the setting with <ENTER>.
The next setting is displayed.
The settings are stored.
When the last setting is confirmed, the setting menu is auto-
matically quit.
• Press <MODE> to exit the setting mode.
Description
The measurement data of the connected sensor are
shown in the measured value display
The course of a calibration with calibration informa-
tion, functions and settings is displayed
A setting is displayed.
Lab 955
ϰ
<-> Sal <-> TDS
ba77144e02 12/2017