Table of Contents
Advertisement
Figure 122. Removing the system battery
CAUTION:
To avoid damage to the battery connector, you must firmly support the connector while installing
or removing a battery.
2. To install a new system battery:
a. Hold the battery with the positive side facing up and slide it under the securing tabs.
b. Press the battery into the connector until it snaps into place.
Figure 123. Installing the system battery
Next steps
1. If applicable,
install the expansion card riser
2. Follow the procedure listed in the
154
Installing and removing system components
and connect the cables to the expansion card(s).
After working inside your
system.
Advertisement
Table of Contents
