Table of Contents
Advertisement
Table 6. Rear view of the system (continued)
Item
6
7
8
9
10
11
12
13
14
15
16
NOTE:
For more information about the ports, see the
Ports, panels or slots
PCIe expansion card slot 6
BOSS-N1 card module
Optional rear drive module
Power supply unit (PSU 2)
Power supply unit (PSU 1)
VGA port
Optional OCP
USB 3.0 port
USB 2.0 port
iDRAC dedicated ethernet
port
Ethernet ports
Icon
NA
NA
NA
Technical Specifications
section.
Dell PowerEdge R760xs system overview
Description
To reset iDRAC, press and
hold the button for more than
16 seconds.
NOTE:
● To reset iDRAC using
system ID, ensure that
the system ID button
is enabled in the
iDRAC setup.
● If the system stops
responding during
POST, press and hold
the system ID button
(for more than 5
seconds) to enter the
BIOS progress mode.
Enables you to connect PCI
Express expansion cards.
Enables you to connect BOSS
card.
Enables you to install two rear
NVMe or SAS/SATA drives.
Indicates the PSU 2
Indicates the PSU 1
Enables you to connect a
display device to the system.
This port supports OCP 3.0.
The NIC ports are integrated
on the OCP card which is
connected to the system
board.
This port is USB 3.0-
compliant.
This port is USB 2.0-
compliant.
Enables you to remotely
access iDRAC. For
more information, see
the iDRAC User's
Guide at
www.dell.com/
poweredgemanuals
The Ethernet ports that
are integrated on the
system board provide network
connectivity. These NIC ports
can also be shared with
iDRAC when iDRAC network
settings is set to shared
mode.
15
Advertisement
Table of Contents
