Expansion card installation guidelines
Figure 91. Expansion card slot connectors
1. SL9_CPU2_PB5 (PCIe cable connector for Riser 1C and Riser 1D)
2. SL10_CPU2_PA5 (PCIe cable connector for Riser 1C and Riser 1D)
3. SIG_PWR_0 (Power connector for Riser 1C and Riser 1D)
4. SL11_CPU1_PA6 (PCIe cable connector for Riser 1D)
5. SL12_CPU1_PB6 (PCIe cable connector for Riser 1D)
The following table describes the expansion card riser configurations:
Table 88. Expansion card riser configurations
Configuratio
Expansion
ns
card risers
Config 0-1.
No riser
Config 0-2.
No riser
Config 1.
R1C
Config 2.
R1D
NOTE:
Only one cable riser can be installed at a time in any given configuration.
NOTE:
The slots 1, 2, 5 and 6 are Gen4 slots, slot 3 and 4 located on risers are Gen5 slots.
124
Installing and removing system components
PCIe Slots
Controlling
processor
1, 2
Processor 1
1, 2
Processor 1
5, 6
Processor 2
1, 2, 3
Processor 1
4, 5, 6
Processor 2
1, 2, 3, 4
Processor 1
Height
Length
Low profile
Half length
Low profile
Half length
Low profile
Half length
Low profile
Half length
Low profile
Half length
Low profile
Half length
Slot width
Power
x16, x8
75 W
x16, x8
75 W
x16, x16
75 W
x16, x8, x16
75 W
x16, x16, x16
75 W
x16, x8, x8,
75 W
x8