Installing The Front Bezel; System Cover; Removing The System Cover - Dell PowerEdge R760xs Installation And Service Manual

Installing the front bezel

The procedure to install the front bezel with and without the LCD panel is the same.
Prerequisites
1. Follow the safety guidelines listed in the
2. Locate and remove the bezel key.
NOTE: The bezel key is part of the LCD bezel package.
Steps
1. Align and insert the tabs on the bezel into the slots on the system.
2. Press the bezel until the release button clicks in place.
3. Lock the front bezel.
Figure 29. Installing the front bezel with the LCD panel

System cover

Removing the system cover

Prerequisites
1. Follow the safety guidelines listed in the
2. Power off the system, and any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
Steps
1. Using a 1/4-inch flat head or Phillips #2 screwdriver, rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
70 Installing and removing system components
Safety instructions.
Safety instructions.