Table of Contents
Advertisement
NOTE:
Equal memory modules refer to DIMMs with identical electrical specification and capacity that may be from
different vendors.
Removing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
WARNING:
The memory modules are hot to touch for some time after the system has been powered off. Allow
the memory modules to cool before handling them.
Steps
1. Locate the appropriate memory module socket.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket to fully open.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
NOTE:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not
occupied. The memory module blanks compatible with R760xs are DDR5 gray color blanks. Remove the memory module
blanks only if you intend to install memory modules in these sockets.
3. Lift the memory module away from the system.
Figure 78. Removing a memory module
Next steps
Replace the memory
module.
Installing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
Before working inside your
Safety
instructions.
system.
Installing and removing system components
113
Advertisement
Table of Contents
