Table of Contents
Advertisement
24 | Installing the Board and Driver
To use the DOME tab online help
The Windows NT driver provides online context-sensitive help
for the DOME tab. You can access the help in either of two ways:
• Click the question mark (?) button on the title bar, then click
the area of the DOME tab with which you need assistance.
• Move the cursor to the area with which you need assistance,
then press <F1>.
Setting the screen configuration
In the Configuration field of the DOME tab, click the screen
number and orientation. Then click Apply or OK.
Remember these tips when installing multiple boards:
• The NT driver (version 4.4.0) supports up to eight boards
(16 screens) of the same type.
• You cannot mix DOME board types.
• Screen zero (0) is the upper-leftmost screen. The rest of the
screens are counted down and then across.
For example, with four screens in a 2 x 2 pattern, the screens
are numbered as follows:
Screen 0, upper left
Screen 1, lower left
• The screens are assigned to the boards in the order in which
the boards are found on the bus. For example, if the first board
is a dual-headed board, it controls screens zero (0) and one (1).
Screen 2, upper right
Screen 3, lower right
Advertisement
Table of Contents
