About The Md4/Pcv Board - Planar DOME Md4/PCV Installation Manual

Planar md4/pcv display controllers: install guide
Table of Contents

Advertisement

2 | Planning the Installation

About the Md4/PCV Board

The Md4/PCV™ board produces high-resolution display
of up to 1728 x 2304 pixels. Each Md4/PCV board can drive
two monitors.
This table summarizes the features of the Md4/PCV board.
This feature...
10-bit DAC
Flexible support for display
resolutions
Hardware copy accelerator
Luminance calibration port
On-board VGA support
128-bit hardware GUI
accelerator: Number Nine™
T2R-IV™ chip
Multi-boot ROM technology Full operating system support for PCI-
Compatibility with the
DOME Image-Processing
Library (DIMPL™) and its
ActiveX™ interface, the
DimplX™ control
Provides this benefit...
Enables true gamma correction of the
display for grayscale fidelity
Provides software-programmable
resolutions up to 1728 x 2304 pixels in
both landscape and portrait modes
Provides on-board copy speeds up to
300 MB per second
Allows precise calibration and matching
of display monitors for accurate grayscale
imaging
Allows booting in MS-DOS™
Supports complex drawing and copy
functions for outstanding GUI
performance
based computers, including these
operating systems:
• MS-DOS™
®
• Windows NT
®
• Windows
2000
Enables image handling and processing,
including 16-bit windowing/leveling,
fractional zooming, image rotation,
and mirroring

Advertisement

Table of Contents
loading

Table of Contents