ICP DAS USA PET-AR400 User Manual page 28

Step 3：Set the Data Acquisition Mode
PET-AR400 offers two data acquisition modes：one is continuous real-time acquisition mode
triggered by software commands, and the other is N sample acquisition mode is activated When
the analog input exceeds the specified threshold value.
To set the data acquisition mode to Continuous Acquisition mode
To set the data acquisition mode to continuous acquisition mode, you need to configure the
following settings:
 Channels：Select the number of channel to be enabled.
 Trigger：Select Software Start as the trigger type.
 Sample Rate：Specify a value of the sample rate from 0 to 128000.
 Sample Count：Specify a value of the target sample from 0 to 15000000. 0 means keep
collecting data until stop command is received.
PET-AR400 User Manual V1.0.0 Top P.28