ICP DAS USA PET-AR400 User Manual page 15

 Reset Button
The PET-AR400 has a reset button on the bottom of
the PET-AR400. This reset button can be pressed to
reset the PET-AR400 to its default settings.
If the reset button is pressed for at least 5 seconds,
the PET-AR400 will perform a factory reset and
reboot.
The table below shows the factory default settings for PET-AR400.
Items
Network Settings
Gain/offset value
Account Management
IP Filter
PET-AR400 User Manual
Default Settings
IP Address 192.168.255.1
Gateway 192.168.0.1
Mask 255.255.0.0
DHCP Disable
Default
Account Admin
Password Admin
None
V1.0.0 Top P.15