Laguna Tools MCNC Creator I-23 Owner's Manual page 37

MCNC Creator I-23/I-24
Work Speed – Set the work speed. Def ault work speed: 6000 mm/min, def ault f ast speed: 3000
mm/min.
Safe Height – Set the Z-Axis maximum lif t height. Def ault height is 40.000 mm.
Auto Scale – Set the speed scale f or toolpath movement. Set in 0.1 (10%) increments. Cannot
exceed 1.0 (100%).
Fall Scale – Set the f all scale and f all height. Def ault f all scale: 0.200 mm, def ault f all height:
5.000 mm.
Stop State – Sets the stop position f or the router head.
G Code Setup – Set the special code read conf iguration in g-code.
Pro Attribute – Set special settings f or specif ic applications.
Circle Limit – Def ault: 1000.00.
Work Array – Set up the array parameter.
5.2.3 System Setup
Languages – Def ault language is English.
Data Initial – Restores f actory system parameters.
Inner Format – Wipes the internal f iles but does not af f ect system parameters.
Wipe Cache – Cleans system errors and f ragmented f iles.
Function Confi (Function Configuration) – Set the state of system f unctions. The HHC will
require a reboot.
Trial Setting – Set trail passwords and password expiration time.
Input Port – List of current input port conf iguration.
Output Port – List of current output port conf iguration.
Buttons Check – Test the f unction of the keypad buttons.
Backup Data – Backup menu parameters.
Restore Data – Restores the backup data.
Probation Pas (Probation Password) – The 20-digit password available controller
manuf acturer.
Backup Pas (Backup Password) – Prevents overwriting of original parameters.
37