Table of Contents
Advertisement
MCNC Creator I-23/24
Keypad Functions (from upper left to bottom right)
BREAK WORK – Resumes work f rom saved break point.
TOOL SET – Enables Z-Axis automatic toolset f unction.
ADVANCED FUNCTION – Advanced Process menu.
REPEAT MACHINING – Repeat last machining process.
XY->0 – Sets X-Axis and Y-Axis Origin.
ZA->0 – Sets the Z-Axis or A-Axis to Origin.
F1 – User-def ined f unction key.
F2 – User def ined f unction key.
X+ (1) – X-Axis positive movement (Right) or Scroll Up (one line) or Number 1 input.
Y+ (2) – Y-Axis positive movement (Backwards) or Increase f eed rate (10% increment) or Scroll
Up (Whole page or Number 2 output).
Z+ (3) – Z-Axis positive movement (Upwards) or Number 3 input.
A+ (4) – A-Axis positive movement (Clockwise) or Number 4 input.
X- (5) – X-Axis negative movement (Lef t) or Scroll Down (one line) or Number 5 input.
Y- (6) – Y-Axis negative movement (Forwards) or Decrease f eed rate (10% increments) or Scroll
Down (Whole page) or Number 6 input.
Z- (7) – Z-Axis negative movement (Downward) or Number 7 input.
A- (8) – A-Axis negative movement (Counterclockwise) or Number 8 input.
HOME (9) – Spindle to Home (Front Lef t Corner) or Number 9 Input.
FAST/SLOW (0) – Manual movement (FSP or LSP) or Number 0 input.
SPINDLE (.) – Spindle start/stop or Decimal input.
MENU (_) – Menu access or Negative symbol input.
ORIGIN OK – X and Y-Axes move to Origin and Z-Axis raise to minimum saf e height or Conf irm
commands.
MODE – Movement selection (continuous, step, or distance)
RUN/PAUSE/DELETE – Run Tool-path/Pause operation or Delete inputs.
STOP/CANCEL – Stops operation or Cancel commands or Move back one Menu screen.
32
Advertisement
Table of Contents
