Connecting The Cables - Planar Dome Q2 Quick Reference

4

Connecting the Cables

Use only the cables and power cord supplied with the Dome Q2 display.
1 Press the PUSH button on the desk stand
and remove the stand cover.
2 Plug one end of the video signal cable to
the DVI port on the display. Tighten the
thumbscrews to secure the connection.
3 Plug the power cord into the power input
port on the interface plate.
4 Plug the other end of the DVI cable into
the video port on the installed display
controller. Use DVI port #1 if you are
installing only one display.
5 Plug the other end of the power
cord into a grounded outlet.
6 Reattach the stand cover.
7 Power on your display first, then
the computer.
8
Power cord
EX2 display
controller installed
DVI cable
DVI cable
Connection
for a single
display