Planar Dome Q2 Quick Reference page 12

7
Using the Panel Controls
The Onscreen Display menu is the user interface for controlling various aspects of the
Dome Q2 display. With it you can easily adjust functions such as brightness, OSD horizontal
and vertical position, and language and transparency. This display is originally manufactured
as a dual-mode display able to operate in either analog or digital mode. Thus, some front panel
controls may not be relevant to the configuration of the Dome Q2 display as a digital unit.
Legend
1 Controls Locked/Unlocked
Press the Menu and Right buttons simultane-
ously for 3 seconds to locked or unlocked the
current control settings.
2 Source button
Press to make the DVI Digital connector
active (Source > Up or Down to highlight
DVI DIGITAL > Select).
3 Menu button
Press to enter or exit the onscreen display.
12
2 3
1
4
4 Navigation buttons
Press Up, Down, Left, or Right button to choose
or adjust items in the onscreen display.
5 Select button
Press to enter a selection in the onscreen
display.
6 Display power switch and DPMS indicator
Press to turn the display on or off. The power
indicator lights up green when the display
operates normally. The color changes to amber
when the display is in energy-saving mode.
5 6