Planar Dome Q2 Quick Reference page 13

8
Making Screen Adjustments
Use the front panel controls and OSD menus to adjust brightness, language and
transparency, and horizontal and vertical positions of the display screen.
To adjust the display screen
1 Press the Menu button. The main menu of the OSD appears.
2 To access a control, navigate with the Up or Down button.
3 Press the Select button when the submenu you want is highlighted.
4 Use the Up, Down, Left, or Right button to adjust the value.
5 Press the Select button to accept the changes.
6 Press the Menu button to exit the OSD control system.
Main
Contrast/brightness
Setup
OSD position
About brightness
When you highlight the Brightness menu
and press Select, you see this message.
The warning is applicable for current calibration settings when you are
using the Dome CXtra software and have the DICal service installed.
Menu Submenu
•
Brightness
•
Language
•
Transparency
•
Horizontal
•
Vertical
Description
Adjusts the brightness of
the screen (See note.)
Customizes the screen status
for your operating environment
Adjusts the position of the
OSD window on the screen
13