6
Adjusting the Display Properties
The display driver installs two additional tabs on the Display Properties dialog box in
the Control Panel. Use the Rotation tab to select the orientation of the display. Use the
Information tab to retrieve controller-specific hardware and driver information. Also use
the dialog box to set up a dual-display configuration.
To set the display orientation
1
Right-click the desktop and select Properties > Settings.
2
Select the monitor that you want to change.
3
Click Advanced.
4
Click the Monitor tab. Make sure the check box for Hide modes that this monitor
cannot display is empty (unchecked).
5
Click the Rotation tab.
•
Check Standard Landscape for landscape mode.
•
Check Rotate 90 Left or Right for portrait mode.
6
Click Yes to save the setting.
7
Click OK until to return to the desktop.
To retrieve controller and driver information
Click Display Properties > Settings > Advanced > Information.
10