Table of Contents
Advertisement
UNLOADING
1.
Park the Big Dog on level ground whenever possible during unloading.
2.
With the operator in the truck or tractor seat, and all others well clear of the Big Dog, engage
the hydraulics.
3.
Engage the switch for the gate delay.
4.
During unloading, move the truck forward to allow the material to fall away from the rear of box.
5.
When the Big Dog is empty, disengage the hydraulics.
6.
Disengage the switch for the gate delay, or engage the switch for the barn doors to close them.
7.
Check the rear door to make sure it is securely latched.
TOP PIVOT DOOR/REAR DOOR LATCHES/GATE DELAY
Located at the bottom left, center, and right-hand side of the rear door
are the door latches. The latches lock into the apron chain to hold the
door closed when loading. When the hydraulics for the main apron chain
are activated, the latches automatically flip to open with the movement of
the apron chains. The rear door is held open by two hydraulic cylinders.
This system allows for a total cleanout of the box. Upon completion
of unloading & switching off the apron chain, the rear door will close.
OPERATION
-16-
Advertisement
Table of Contents
