Function Tests
1.9 Function Tests
Do the function tests to find malfunctions in the
MEWP before it is put into service. The operator must
understand and follow the step-by-step instructions in
the operation manual to do all the MEWP functions.
IMPORTANT
Do not operate a MEWP that does not function
correctly. Lock and tag the MEWP , and remove it
for servicing. Only a qualified service technician
must repair the MEWP . If you do not obey, there is
a risk of death or serious injury.
After repairs are completed, the operator must
▪
do a pre-operation inspection and a series of
function tests again before putting MEWP into
service.
Before you do the function tests, read and
▪
understand the "Start Operation" section of the
operation manual.
Before you do the function tests, look for the
▪
operation manual with the same serial number
as your MEWP . The operation manual has the
instructions on which tests to do and how to do
them correctly and successfully.
SJ3215, SJ3219
Section 1 – Scheduled Maintenance
212508ADA
27