Flycam FLCM-PLA-EA Assembly Manual

Flowline placid extension arm

Download this manual

Flowline Placid Extension Arm

(FLCM-PLA-EA)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

2 x Screw (Sizes: 5/25")

Flowline Placid Extension Arm

Allen Key (Size: 4mm)

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Page 1 Flowline Placid Extension Arm (FLCM-PLA-EA) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Flowline Placid Extension Arm Setup  With the help of an Allen key, remove the bottom screw of the flowline placid two axis spring (Not Included), as shown in the image.  Remove the bearing pulley from the Flowline Placid Two Axis Spring Arm. ...
Page 3  Repeat the same process for the second screw. NOTE: The minimum extension length is 56mm and the maximum is 116mm.  Remove the screw with the help of the Allen  Remove the bearing pulley of Flowline Placid Extension Arm as shown in the image. ...
Page 4 YOUR FLYCAM FLOWLINE PLACID EXTENSION ARM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.